many objects and items that use wood. In addition, this activity is that you can use the
imagination and creativity, and thus, the adults and the children find it exciting. By doing woodworking
at home, you can create some necessary items at home and save a lot of money. If you are new
woodworking, there are the following simple woodworking plans for children and adults helpful.
Wooden Toy Box Construction
If you made wooden toys when you were a child, now is a good time to try to build a toy box
wood for storing toys. This is not hard to do and can be done very quickly.
Once you master how to make this toy box, you can use the same ability to make a box that you can
use to store other items.
You will need the following items
Safety glasses
Sandpaper
Wood filler
Measuring tape
Carrying handle of the box
Hinges Safety
Saw
Hammer
Screws
Hardwood sheets / plywood
Indications
A. Wear safety glasses to prevent wood particles from entering your eyes
B. Use the measuring tape to make some marks on the plywood according to the breadth and
desired length of the box.
C. Make larger pieces for the back, front, top and bottom, if you intend to make a rectangular shape
box. All elements can be of equal size if you plan to make a square box.
D. You can use the saw to cut the plywood according to your markings made.
E. Then place the card down on the floor and make sure it is flat. Hold the front and
have a two inch screw nailed into it. You may need someone to help you with this.
F. Secure the rear position, following the same procedure as above.
G. Use the same procedure to attach the sides. However, further screws must
nailing these parts for the rear and the front.
H. From the side on the outside, merge the handle in the upper part of the box. After that, the
safety hinges should be attached to the rear and the top of the box.
I. Finally, use wood putty to fill the holes in the box. Sand the box from sanding.
J. have successfully built a toy box. You can get painted to give it an attractive
watch.
Building Wooden Chopping Board
Presented below is one of the easiest woodworking plans you can get. Every family needs a
cutting board, so it's a good idea to make a charming setting for your home. Consider the
procedure presented below and have fun at work.
You will need the following items
- Safety glasses
- Sandpaper
- Oil
- Router? Round inches above bit '
- Bar Clamps
- Waterproof glue
- Measuring tape
- Table Saw
- Hardwood
- Indications
A. Before you begin, you need to wear safety goggles to protect your eyes.
B. Cut the hardwood in 16 strips of the same length measurement. (The size you want to be
determine the extent)
C. Use the glue to stick together all the strips cut and join the terminal bars to it. Let
for about 24 hours to set.
D. After hardening, remove the clamps and sand the top of the table.
E. You can now use the saw to cut the edge to the length and shape you want, but if you
prefer, you can leave the card as is.
F. Then, use the router to allow the Board edges rounder and smoother. In addition, it is necessary to sand the
surface and edge once again.
G. Finally, apply a patch of thick oil and leave it for a few hours to set.
H. You now have a cutting board or cutting. You can start using immediately.
Close
Here are just a couple of simple woodworking plans that anyone can follow. If you want to try
woodworking at home why not have a go for you? There's a lot of plans and projects to choose from.